SBC-A62-J

Depending on the configuration and following revisions, the board’s features are subject to change. For detailed information on hardware specifications, please visit www.seco.com.

 

The SBC-A62-J is a low-end Single Board Computer with NXP i.MX6 Processor, that exploits the potential of a configurable expansion connector to fully meet any configuration flexibility needs. This SBC is ideal for digital signage, infotainment applications, and in all general purpose contexts requiring multimedia capabilities and high performance for the reproduction of relevant and/or engaging contents.

 

INDEX


How can I power on my module?

https://secospa.atlassian.net/l/c/SkJSEaQt


What will I find in my module?

Off-the-shelf products are shipped with a standard in-house-developed software.
The definition of standard, in this case, is “the environment which SECO adopts for validation”.
Anyway, custom in-house-developed software with different defaults can be built.
Contact your reference sales for further information.


What can I do now?


What are the features of the module?

The SBC-A62-J allows to directly access to some of the features of i.MX6 processor through the pin multiplexing. On-board there is a dedicated 32-pin expansion connector (J8, see Fig. 1) which is a standard dual-way male pin header.
Below is a description of the pinout configuration.

Pin Number

Pin Name

Pinout Configuration Options

Port Number

Pin Number

Pin Name

Pinout Configuration Options

Port Number

  1.  

VCC_SW

x

x

x

x

2.

3P3V

x

x

x

x

3.

GND

x

x

x

x

4.

EXP_GPIO_1

x

GPIO1_IO09

x

1

5.

EXP_GPIO_2

ECSPI2_MISO

GPIO2_IO25

x

2

6.

EXP_GPIO_3

ECSPI2_SCLK

GPIO2_IO23

x

2

7.

EXP_GPIO_4

ECSPI2_MOSI

GPIO2_IO24

x

2

8.

EXP_GPIO_5

ECSPI2_SS0

GPIO3_IO29

x

2

9.

EXP_GPIO_6

FLEXCAN1_TX

GPIO1_IO07

x

3

10.

EXP_GPIO_7

FLEXCAN1_RX

GPIO1_IO08

x

3

11.

EXP_GPIO_8

UART4_CTS_B

GPIO6_IO03

x

4

12.

EXP_GPIO_9

UART4_TX_DATA

GPIO5_IO30

x

4

13.

EXP_GPIO_10

UART4_RTS_B

GPIO6_IO02

x

4

14.

EXP_GPIO_11

UART4_RX_DATA

GPIO5_IO31

x

4

15.

EXP_GPIO_12

x

GPIO3_IO28

I2C1_SDA

5

16.

EXP_GPIO_13

SPDIF_IN

GPIO3_IO21

I2C1_SCL

5

17.

EXP_GPIO_14

SPDIF_OUT1

GPIO4_IO05

x

5

18.

EXP_GPIO_15

SD1_CMD

GPIO1_IO18

PWM4_OUT

6

19.

EXP_GPIO_16

SD1_CLK

GPIO1_IO20

x

6

20.

EXP_GPIO_17

SD1_DATA0

GPIO1_IO16

x

6

21.

EXP_GPIO_18

SD1_DATA1

GPIO1_IO17

PWM3_OUT

6

22.

EXP_GPIO_19

SD1_DATA2

GPIO1_IO19

PWM2_OUT

6

23.

EXP_GPIO_20

SD1_DATA3

GPIO1_IO21

x

6

24.

EXP_GPIO_21

I2C3_SDA

GPIO7_IO11

x

7

25.

EXP_GPIO_22

I2C3_SCL

GPIO1_IO03

x

7

26.

EXP_GPIO_23

UART1_RX_DATA

GPIO5_IO29

x

8

27.

EXP_GPIO_24

UART1_TX_DATA

GPIO5_IO28

x

8

28.

EXP_GPIO_25

UART5_RX_DATA

GPIO6_IO01

x

9

29.

EXP_GPIO_26

UART5_TX_DATA

GPIO6_IO00

x

9

30.

EXP_GPIO_27

UART5_RTS_B

GPIO4_IO14

FLEXCAN2_TX

10

31.

EXP_GPIO_28

UART5_CTS_B

GPIO4_IO15

FLEXCAN2_RX

10

32.

GND

x

x

x

x

 

 

 

Fig. 1: J8 expansion connector

 


Accessories

These are the accessories offered by SECO for the SBC-A62-J.

For more information, click on the accessory of your interest.

Accessory

Description

Accessory

Description

VA09

Camera module with integrated KLT Auto-Focus 5MP and FCC cable (15 cm, 16-poles). Available in two versions:

  • Kit Camera 5MP sensitive to IR Light

  • Kit Camera 5MP

KIT-7INCH-SA62 

Display kit with 7” TFT RGB Display and I2C capacitive Touch Screen, and video cable

KIT-15INCH-SA62 

Display kit with 15,6" LVDS display and video cable

KIT-WIFI-3M08-1

IEEE 802.11 b/g/n WiFi Module based on Ralink RT5370 chipset, with 7-pin USB interface

KIT-WIFI-3M08-2

IEEE 802.11 b/g/n WiFi Module based on Ralink RT3070 Chipset, with external 50Ω 2.4GHZ antenna and 6-pin USB interface

Please note that the KIT-WIFI-3M08-1 and the KIT-WIFI-3M08-2 have USB interfaces with a different number of pins. Each one can only be used with a board with the same number of pins.


Downloads

Source code:

Source code for linux kernel, u-boot and yocto seco layers is available here.

Binaries:

Here you can find the latest binaries available:

Board configuration

Version

image

filesystem

u-boot

kernel